JetCat PRO SMOKE PUMP

ИНФОРМАЦИЯ О НАИМЕНОВАНИЯХ

Nice and big smoke behind your jet!

JetCat  PRO SMOKE PUMP

• Fully optoisolated inputs
• Can be operated parallel to the turbine battery
• They are 3 different operatiion modes selectable:

1) Rx mode: Pump control via a free recever channel (proportional pump control or just On/Off control).

2) ECU mode: In connection with the JetCat ECU, the pump can be directly controlled via the "Smoker valve" output on the ECU.

3) ECU / Rx mode: Pump power control via a free receiver channel, additionaly the pump is connected to the JetCat ECU; this avoid an accidental start of the pump in case the engine is not running. (taht means, the ECCU will only enable the pump if the turbine is really running)

• Freely programmable pump power (flowrate) -With the pump there is a one valve added which, when placed in the sucction line of the smoke fluid, will avoid a dripping of smoke fluid when the pump is stopped. In addition to this pump provides an output for an optional electromagnetic shut-off valve. The valve will open automatically whenever the pump is runing.
• Stylish, rugged, anodised aluminium housing.

Technical data:

• Dimensions: Ø31.5mm, L 77mm
• Weight: 110gr
• Flow rate: Max 2000ml/mn
• Pressure: max 5bar
• Power supply: 6.8 to 9,6V, Max 7A
• Inputs: -1x control input, from Rx -1x enable input, from ECU
• Output: -1x control output, for shut-off valve